Best Plasma Cutters: For Your Budget

Most Powerful Plasma Cutters Under 1000 Dollars

There are 3 probably best plasma cutters under 1000 dollars:

1. Everlast PowerPlasma 50S Plasma Cutter under 1000 dollars

best plasma cutter under 1000

 

Everlast PowerPlasma 50S Plasma Cutter is great plasma cutter under 1000 dollar budget. designed generally to cut up to 1/2 inch thick metal really fast. It is capable to cut 1/2 inch @ 15-20 ipm fast. It has 50 AMPS of professional cutting power. If you need to cut 3/4 inch it will get job done with some slag you can get easily off with a hammer. If you need severance cut you can go up to 15/16 inch but for thicker materials better go with Everlast PowerPlasma 60S (last one in this article).

When you consider initial cost and long term operating costs all PowerPlasma 50S is certainly one of the best performing IGBT plasma cutters on the market for the price. It offers plenty of capability for the average small fab shop or hobbyist. It is  also great performer in light industrial setting. Everlast PowerPlasma 50 S is light and portable plasma cutting machine. Everlast PowerPlasma 50S can be great plasma cutter for under 1000 dollars. This Everlast new generations of  PowerPlasma 50S features Italian designed  torch. IPT 60 is an improvement over the older series of torches. It has improved consumable life, and a bigger range of consumables. New torch tip saver function helps to limit Pilot arc time and extends consumable life.  CNC port is also now standard on this unit.

General specifications:

  • Cut capacity:
    up to 1 / 2 inch daily use @ 15-20 ipm,
    up to 3 / 4 inch clean cut @ 8-12 ipm,
    up to 15 / 16 inch severance cut @ 3-5 ipm,
    up to 5 / 16 inch operating on 120V,
  • 110/220v dual voltage capability,
  • upgraded IPT-60 torch,
  • “blow back” start technology,
  • pilot arc,
  • CNC port for light gauge CNC use,
  • adjustable “post flow” timer of up to 60 seconds (extends consumable and torch life).

Usually comes with:

  • Work clamp,
  • 15 ft Italian designed and patented iPT 60 torch,
  • water trap (this is not an air dryer),
  • air pressure gauge,
  • and consumable starter kit.

 

2. Razorweld Plasma CUT 45 Plasma Cutter under 1000 dollars.

best plasma cutter under 1000 dollars razorweld 45 amp

 

Razorweld Plasma CUT 45 is small, light and efficient single phase industrial plasma cutter. Great tool for your metal cutting job. It usually comes with 220 V plug in standard. Razorweld Plasma CUT 45 can make 5/8 inch clean cut and in severance cut you can push it even to 1 inch if it’s really needed. It has 20 ft TRF 45 Plasma torch. Razorweld Plasma CUT 45 is great for sheet and metal fabrication, repair and maintenance services, light industrial use, automotive, site work, ducting work and more. It can be used with generator supplied power. It has 2 year warranty and you can register it online and get extra 6 months added to your warranty in their webpage.

Plasma cutter CUT 45 comes complete with a 2T / 4T function which reduces operator fatigue. With simple 20 – 45 AMP dial you can easy change your cutting capacity. Low frequency pilot arc start ensures reliable and consistent operator ignition, without interference to electrical devices near by .

General specifications:

  • Cut capacity:
    Up to 5 / 8 inch clean cut,
    Up to 1 inch severance cut,
  • 220 V,
  • 20 – 45 AMP dial changes cutting capacity ,
  • preset air adjustment,
  • user friendly, lightweight, portable,
  • builtin handle to easy carry around.

Usually comes with:

  • pre-set air-regulator,
  • 19.5 ft sure grip torch,
  • a return lead.

 

 

3. Everlast PowerPlasma 60S plasma cutting system under 1000 dollars.

best plasma cutter under 1000 dollars Everlast 60s

 

This Everlast PowerPlasma 60S plasma cutter is more powerful than first one. It costs around 1000 dollars, sometimes little more, but its worth to the money. Great plasma cutter for 1000 dollars. This plasma cutter will save your time and money. This Everlast PowerPlasma 60S will be great for welding and fabrication shop.

This plasma cutter is built on an inverter platform making use of “IGBT” modules from “Infineon” (by Siemens) to reduce weight, improve performance and reliability. Everlast PowerPlasma 60 S can cut up to 3/4 inch pretty fast.  It is capable for  1 inch reasonable clean cut and 1-1/4 inch cut in severance cutting. It comes with new iPT 60 torch (with proven long life Italian design with blow-back start, Pilot-ARC and a variety of consumable choice). Easy start with “Blow-back” Pilot arc allows easily to cut rusty and painted metals. Plasma cutter is suitable for use with 11000 W “clean power” generators.

General specifications:

  • Cut capacity:
    up to 3 / 4 inch daily use @ 15-20 ipm,
    up to 1 inch clean cut @ 8-12 ipm,
    up to 1 – 1 /4 inch severance cut @ 3-5 ipm,
  • 220 V,
  • new IPT-60 torch,
  • “blow back” start technology,
  • pilot arc,
  • CNC socket for CNC use on plasma tables,
  • Adjustable “postflow” timer for maximum consumable life.

Usually comes with:

  • Work clamp,
  • 15 ft Italian designed and patented iPT 60 torch,
  • air pressure gauge,
  • and consumable starter kit.

 

Note:

Plasma cutting capacity is affected by several factors, ideal cutting conditions requires: new consumables, dry air, proper air pressure, etc… Cutting quality depends upon consumable orifice size, standoff height, and travel speed.

You can also check out:

or

You like this? Please share:
NOT FIND YOU ARE LOOKING FOR?
Search On Amazon Here:





Best tools for welding, best priced plasma cutters, coolest welding helmets, best pipe welding equipment, cool welding apparel, durable welding carts, good welding clamps, cool gifts for welders, pipe jack stands, other metalworking tools and more...

ToolsForWelding.com 2018
Amazon.com affiliate disclaimer:
Toolsforwelding.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.