There are some examples for plasma cutter under 200 dollars:
1. CUT-50 Plasma Cutter Inverter 50AMP
You can easy find this one on Amazon. Prices changes every time, but under 200 dollars this plasma cutter will be a good deal. At some sellers this plasma cutter can be priced little bit more than $200, but it’s hard to find better plasma cutter around this price.
CUT-50 has dual voltage support. That means it will work with both 110V and 220V outlets. It will cut up to 1/2″ (~10-12 mm) if you go slowly and not care about the finish, but better use it for metals thinner than 1/4″ (6 mm). Rate Output Current is 20-50A. Rate Output Voltage is 96V. No-load Voltage is 240V.
Using inverter technical of switch power. Weight and dimensions of transformer has deduced efficiency and substantially, has increased by 30 %. It has function that it can supply gas ahead and turn off gas delayed. Applicable To The Environment: Outside Max 80% dampness level and temperature between – 10 And +40 degrees. Package usually includes: 1 plasma cutter, 1 pressure reducing valve, 1 ground cable, 1 cutting gun, 1 face mask, and 1 brush. This is brand new and professional plasma cutter from this manufacturer and it’s widely used for cutting stainless steel, alloy, mild steel, copper and other materials. It has function that it can supply gas ahead and turn off gas delayed.
Thickness: up to 1-12 mm (up to 1/2 inch),
Power Voltage: 110V or 220V, 60Hz,
Rate Output Current (A): 20-50
Pilot Arc Model: HF Oscillating
Burner Inter Diameter (mm): 1,0
Pressure Of Air Compressor needed : 4-5 kg / 8,8-11 Lbs
Applicable to the environment: outside temperature between – 10 and +40 degrees, dampness level of max 80%
Cutting machine has characteristics as following:
4. save-energy and no noise
5. high cutting speed
6. cut smoothly and no polish demands
2. You can get yellow CUT-50 plasma cutter under 200 dollars:
3. Or this one very similar plasma cutting machine under 200 dollars:
You can also check out:
Search On Amazon Here: