Best Plasma Cutters: For Your Budget

Best Plasma Cutters Under 1500 Dollar Budget

There are 5 best plasma cutters under 1500 dollars:

1. Plasma Cutter Under 1500 dollars – Hypertherm  Powermax 30 XP

best plasma cutter under 1500 dollars hypertherm

 

Plasma Cutter under 1500 dollars – Hypertherm Powermax 30 XP is probably the best plasma cutter for the money you can buy. Hypertherm makes really great and durable plasma cutters with no doubt. Powermax30 XP is a highly portable plasma cutter that can handle a wide range of cutting applications. Up to 1/2 inch it can get job done fast and easy. Powermax 30 XP can cut any kind of metal like stainless steel, mild steel and aluminum, even if it’s rusted or painted. With it’s “two-in-one” design, this plasma cutter provides “high power” capability for thick metal cutting and “Fine Cut” consumables for detailed thin metal cutting applications. Hypertherm Powermax30 XP can use air or nitrogen. It has “auto-voltage” (automatically adapts to 110 V – 240 V input, plug adapters are included ). Duramax LT torch design provides a sure, comfortable grip. Torch is made from heat and impact resistant materials. Hypertherm Powermax 30 XP will help you get your cutting jobs done faster and easier with lower costs.

General specifications:

  • Cut capacity with 240 V:
    10 mm (3 / 8 inch) 20 ipm (500 mm / min),
    12 mm (1 / 2 inch) 10 ipm (250 mm/min),
    16 mm (5 / 8 inch) 5 ipm (125 mm/min) severance,
  • Cut capacity with 120 V:
    6 mm (1 / 4 inch) at 19 ipm (482 mm / min),
    10 mm (3 / 8 inch) at 8 ipm (203 mm / min),
    12 mm (1 / 2 inch) at 3 ipm (76 mm / min),
  • output current: 15 – 30 A,
  • rated output voltage: 125 VDC,
  • duty cycle: 40°C (104 °F) 35 %, 240 V, 20 %, 120 V,
  • open circuit voltage (OCV) 256 VDC,
  • dimensions with handles:
    14,0 inch (356 mm) D; 6,6 inch (168 mm) W; 12,0 inch (305 mm) H,
  • weight: 21,4 lbs (9.7 kg),
  • gas supply: clean, dry, “oil free” air or nitrogen,
  • Recommended gas inlet flow rate / pressure:
    113.3 l/min (4 scfm) at 5.5 bar (80 psi),
  • power supply type inverter: IGBT,
  • Engine drive requirement 5,5 KW for full 30 A output,

Usually comes with:

  • Power supply, 15′ (4,5 m) Duramax LT hand torch with standard consumables,
  • 15′ (4,5 m) work clamp,
  • 240 V 20 A plug with adapters for 120 V 15 A and 240 V/20 A circuits (CSA models),
  • operator and safety manuals,
  • consumable kit,
  • plastic carry case,
  • carrying strap,
  • leather gloves and shade 5 glasses (the gloves and glasses are currently only available in the system sold in the USA and Canada).

 

2. Hobart Airforce 40i Plasma Cutter for 1500 dollars or less

Plasma cutter with built in air compressor under 1500 dollar

 

Hobart Airforce 40i Plasma Cutter is powerful and  lightweight. With only 40 amps of power Airforce 40i plasma cutter can cut 5 / 8 inch clean and fast, but severance cutting get through 7 /8 inch steel. Hobart Airforce 40i Plasma Cutter uses 240 V power. It weights only 31lbs (14 kg) and it is really portable for its power. Hobart Airforce 40i is great cutting machine for light and heavy industrial users. Setup Hobart Airforce 40i is easy too. Amperage is easily adjustable on the front of the machine with single knob. Hobart usually makes good quality and reliable tools. If you not need to cut that thick metals, you can also get Hobart Airforce 27i plasma cutter that is cheaper, not so powerful but has dual voltage (240V/120V) capability.

General specifications:

  • Cut capacity:
    up to 5 / 8 inch clean cut – steel,
    up to 7 / 8 inch severance cutting- steel,
  • uses 240 V input power,
  • “Auto-Refire” technology (allows operator to cut expanded or perforated metals and painted or coated surfaces),
  • ergonomic trigger safety,
  • efficient air consumption,
  • XT40R torch consumables

Usually comes with:

  • XT40R torch with 12 ft. (3,66 m) lead,
  • consumables,
  • heavy duty work clamp with cable
  • 10 ft. (3 m) power cord with 230 V, 50 A plug.

 

3. Everlast PowerPlasma 80S 80 AMP Plasma Cutter for 1 inch steel

Plasma cutter for 1 inch steel under 1200 dollars Everlast PowerPlasma 80S

 

Everlast PowerPlasma 80S ir really powerful 80 amp plasma cutter. It can cut 1 inch steel pretty fast and clean. It’s rated to cut even up to 1 7/16 in severance cutting. Easy start with Pilot ARC is really good benefit and allows easy to cut through rusty and painted materials. Everlast PowerPlasma 80S plasma cutter can cut virtually any type of metal (like steel, stainless steel, nickel alloys, aluminum, titanium, copper and more) with no problem. Torches used with  Everlast PowerPlasma 80S are simple to use and have inexpensive service parts and reasonably cheap consumables. Adjustable “Post Flow” (power plasma only) control up to 60 seconds improve consumable and torch life. Plasma cutter have front air pressure gauge that makes adjusting air pressure easy.

General specifications:

  • Cut capacity:
    Up to 1 inch daily use @ 15-20 ipm,
    Up to 1 and 1/4 inch clean cut @ 8-12 ipm,
    Up to 1 and 7/16 inch severance cut @ 3-5 ipm,
  • input: 220 / 240 V 1 phase,
  • output: 20-80A/88V-112V
  • Duty cycle at rated amps / volts:
    60 % @ 80 A / 112 V,
    100 % @ 63 A / 105 V,
  • Pilot Arc,
  • Italian designed iPT 80 torch,
  • IGBT technology,
  • CNC Interface Port,
  • “OK-to-Cut” indicator and low air pressure safety,
  • Adjustable “Post Flow” timer,
  • recommended air pressure for cutting :  70-75psi,
  • recommended compressor capacity: 7CFM @ 90 psi / 60 gallon tank,

Usually comes with:

  • 15ft. Italian “Blow Back” iPT 80 hand held torch (with Euro quick-connect central adapter),
  • Air pressure regulator / water trap (separate air dryer is required to reduce consumable wear and prevent torch damage),
  • work clamp with 10 ft cable and DINSE connector,
  • consumable starter kit.

 

4. Miller Plasma Cutter around 1500 dollars – Spectrum 375 X-TREME

cheap miller plasma cutter

 

Spectrum 375 X-TREME is really small and durable plasma cutting machine. It is not so powerful than others in this article, but it’s definitely the most portable. It weights only 19 lbs (approximately 8,6 KG). This Miller plasma cutter can cut 3 / 8 inch at 18 IPM. The rated cutting capacity is based on traveling approximately 15 inch per minute to achieve a steady and precise cuts. Its rated power output is 30 A. Miller Spectrum 375 X-TREME has dual voltage capability. It is great and portable machine for metal cutting application.

General specifications:

  • Cut capacity:
    3 / 8 inch at 18 IPM,
  • Input Voltage :
    110 / 115 / 120 V,
    220 / 230 / 240 V,
  • single phase,
  • XT30 Torch and Quick Connect Work Lead and Clamp,
  • Protective X-CASE,
  • portable design,
  • weights only 19 lbs (approximately 8,6 KG).

Usually comes with:

  • XT30 torch with 12 ft (3,7 m) cable,
  • heavy duty work clamp with 12 ft (3,7 m) cable,
  • 10 ft (3 m) MVP  power cord,
  • X-CASE,
  • MVP plugs (5-15P 120 V, 15 A and 6-50P 240 V, 50 A),
  • shoulder strap,
  • consumables (2 electrodes, 2 tips, deflector, and air fitting).

 

 

5. Thermal Dynamics Cutmaster 42 dual voltage plasma Cutter under 1500 Dollars

Best Plasma Cutter Under 1500 Dollars thermodyne

 

Thermal Dynamics Cutmaster 42 is really great plasma cutter under 1500 dollars. It delivers professional cutting power tu use it all day long with recommended cutting capacity (1 / 4 inch with 120 V and 3 / 8 inch with 220 V). Cutmaster 42 is even capable to cut up to 5 / 8 inch with 120 V or 3 / 4 inch using it with 220 V. The Thermal Dynamics Cutmaster 42 uses “Vent2Shield” technology that allows to use considerably smaller air compressor and it gives you less weight to carry around. This Thermal Dynamics Cutmaster 42 plasma system will be great for auto body, repair and maintenance services, plumbing, HVAC, light fabrication, repairing and making agricultural equipment and more. It usually comes with 4 year warranty.

General specifications:

  • Cut capacity:
    recommended with 120 V: 1 / 4 inch (6 mm),
    maximum with 120 V: 5 / 8 inch (15 mm),
    recommended with 120 V : 3 / 8 inch (9,5 mm) ,
    recommended with 220 V: 3 / 4 inch (20 mm),
  • Air/Gas Requirements:
    gas flow 192 cfh (91 l / min),
    gas pressure 5,2 bar (75 psi),
  • Dual voltage (120 / 230 V),
  • Output Ratings:
    120 V Amp high: 27 A,
    230 V Amp high: 40 A,
  • Dimensions:
    Height 9 inch (228 mm),
    Length 18,5 inch (470 mm),
    Width 7 inch (177 mm),
  • Weight 26 lb (11,8 kg).

Usually comes with:

  • SL40 75 torch with 15′ lead,
  • set of consumables,
  • power plug adapters,
  • safety gloves & glasses,
  • heavy-duty carrying case,
  • instructional plasma cutting DVD.

 

 

Which plasma cutter to buy is up to you. I personally prefer Hypertherm because it has the best reviews on the internet and seems to get job done every time.

You can also check out:

or

You like this? Please share:





Best welding tools for your money: TIG, MIG, ARC welders, plasma cutters, multi-process welders, plasma cutter welder combos, best performance and great looking welding helmets, welding apparel, metal band saws, pipe welding equipment, jack stands and more metalworking tools...

ToolsForWelding.com 2018
Amazon.com affiliate disclaimer:
Toolsforwelding.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.